This good-natured rabbit is eager to please, and easy to use! Think of this vibrating cock ring as a fun costume for a penis, that allows it to do the same tricks as a "rabbit" or dual-stimulation vibrator. During penetrative sex, the strong, buzzy bullet vibe and fluttering bunny ears will massage and vibrate against a partner's body. During good old face-to-face, penis-in-vagina sex, those vibrations should end up pretty close to the clitoris. Good times! 

But that's not all the O'Hare does. The multiple rings on this toy make for a secure fit that can feel very satisfying. If you've got a package that enjoys being tugged, grabbed and gently gripped, these dual rings could be right up your alley. 

The standard-sized bullet vibe that comes with this toy is a great place to start, but is easily upgradeable for those who want more intense vibration. Add a 3" Platinum Power Bullet for stronger, battery-powered vibrations, or go all out with the We-Vibe Tango rechargeable vibrator for hands free vibration that's really tops!

Details

Length of Bullet: 2.25 inches

Measurements:

Small ring

inner unstretched diameter: 1.125 inches

maximum stretched width: 3 inches.

Large ring

inner unstretched diameter: 2 inches

maximum stretched width: 8 inches

Settings: 3 speeds, and additional pulsation mode.

Materials: Silicone and ABS Plastic

Power Source: three AG13 batteries, included.

Manufacturer: Screaming O

Country of Origin: Made in China

Care/Cleaning

This product is made of silicone and has electronic components.

Silicone is non-porous and non-toxic. Medical grade silicone is totally safe for your body. It can be easily cleaned and sterilized by following the guidelines below.

To clean silicone, wash it with hot water and a body-friendly soap before and after each use. Make sure your toy is dry before storing it. Be mindful of any seams, charging interfaces or buttons on your toy, and follow the instructions provided by the manufacturer to ensure that your toy is not damaged by moisture.

To sterilize silicone, wash it and then boil it in plain water for 3-5 minutes. You can use this method of sterilization if the electronic components of your toy are removable.

For toys that cannot be submerged in boiling water, use a solution of 1 part bleach and 9 parts water. Soak your silicone toy in this solution for 5 minutes, then allow to air dry. If your toy is not submergible, simply wipe, spray or dip the toy in the bleach solution without submerging the moisture sensitive areas.

Sterilize your silicone sex toys between partners, between holes, or if you would just feel better about using your toy if you did.

Solid silicone can sometimes be incompatible with silicone lubricant. Before applying silicone lube to a silicone toy, we recommend conducting a “patch test.” After 10 minutes of contact with silicone lube, rinse your toy and inspect for signs of bonding, peeling, or a foggy or damaged surface finish. If there are no visible signs of damage, your toy is safe to use with silicone lube.

Manufacturer

SCREAMING O

Screaming O produces a range of products, but are most known for their cock rings. Their easy to use elastomer and silicone rings are affordable, effective, and are available in a variety of sizes, as well as vibrating and non-vibrating models. One of the larger manufacturers in the sex toy industry, Screaming O has received multiple AVN Award nominations for both its toys and its enhancement products.

Think of this cock ring as a sexy leather belt for your dick! Buckle it down to a comfortably snug fit around the base of the penis for a style statement that will also help keep erections at their firmest and fullest. This ring is made from soft and sturdy leather reinforced with stitching for durable, comfortable edges.

Details

Height: 0.75 in.

Circumference: Approximately 5-8 inches

This item is handmade; measurements are subject to vary!

Materials: leather, metal

Care/Cleaning

Stretchy, smooth, and easily adjustable, the Buddy is the perfect cock ring for beginners. Basically, this user-friendly ring works like a bolo tie for your erection! Simply slip the silicone loop over the penis, squeeze the plastic clasp, and slide it to adjust the loop until it's exactly as tight as you’d like. When it's time to remove the ring, just give the clasp another squeeze to loosen it up and off it comes - no tugging, pinching, or stretching required. The ring is available in classic black or a lovely light blue, and made of elastic silicone with a velvety soft finish for maximum comfort against the skin.

Details

Maximum Diameter: 4 in. (approx.)

Materials: silicone (ring), ABS plastic (clasp)

Manufacturer: Tickler

Country of Origin: designed in Sweden, made in China

Care/Cleaning

This product is made of solid silicone, with a clasp of ABS plastic. We suggest washing the clasp with soap and water and letting it dry separately, so that the spring inside does not rust.

Silicone is non-porous and non-toxic. Medical grade silicone is totally safe for your body. It can be easily cleaned and sterilized by following the guidelines below.

To clean silicone, wash it with hot water and a body-friendly soap before and after each use. Make sure your toy is dry before storing it.

To sterilize silicone, wash it and then boil it in plain water for 3-5 minutes. As an alternative, you can also use a solution of 1 part bleach and 9 parts water. Soak your silicone toy in this solution for 5 minutes, then allow to air dry. Sterilize your silicone sex toys between partners, between holes, or if you would just feel better about using your toy if you did.

Solid silicone can sometimes be incompatible with silicone lubricant. Before applying silicone lube to a silicone toy, we recommend conducting a “patch test.” After 10 minutes of contact with silicone lube, rinse your toy and inspect for signs of bonding, peeling, or a foggy or damaged surface finish. If there are no visible signs of damage, your toy is safe to use with silicone lube.

Manufacturer

TICKLER

Tickler is a Swedish designer sex toy company that creates simple, playful vibrators. We love that their affordable price point makes super quality vibrators accessible to more people, both here at Smitten Kitten and across the world. Their Toyfriend vibes have a one year warranty and many come with batteries.

This compact, low-maintenance stroker sleeve really puts pleasure in the palm of your hand. The Vulcan sleeve is roughly the size of a tall beverage can, which makes it the perfect "goldilocks" option between the compact Tenga Egg and bulkier Fleshlight products. Vulcan sleeves are available in two different styles (Wet and Tight), and three different representational orifices - mouth, anus or vulva/vagina. The "Wet" sleeves are made of white elastomer, and have a slightly looser, more textured interior. The "Tight" sleeves are made of translucent elastomer, and are a just a little bit more snug and less textured.

This sleeve is great for solo action, but it's also fun to use with a partner. The soft sleeve is easy to remove from its flexible plastic case for cleaning, or just to play with and experiment with a different kind of sensation.

Details

Penetrable Length: 6 inches

Diameter: 2.2 inches

Material(s): Elastomer, plastic

Manufacturer: Funzone

Care/Cleaning

This product is made of elastomer.

Elastomer is non-toxic, phthalate-free, and latex-free, but it is a porous material. While it is easily cleaned, it cannot be completely sterilized.

To clean an elastomer toy first thoroughly rinse with hot water, then use an oil-free soap or isopropyl alcohol, working the cleaning agent over the surface of the toy, then rinse again. Avoid using soaps with high acid, oil, or alkaline content, as they can erode the elastomer. Let your elastomer toy air dry completely before storing it. Elastomer can collect dust easily, so it’s best to store it in a sealed container. Store in a cool, dry place away from direct sunlight, at room temperature. Do not cool your toy, as both refrigeration and freezing of the product are causes of degradation of the product.

Elastomer is compatible with water-based lubricants. Silicone and oil based products can degrade the material and will not wash out of its pores.

Do not cut or alter the shape of the material. Doing so will cause irreparable harm to your toy. Elastomer, once cut, will continue to tear. This means you should not expose your sex toy to sharp objects.

Is there any better sensation in a stroker than the amazingly soft feel of Fleshlight’s patented SuperSkin® and the awesome textures hidden inside each sleeve? Fleshlight must think so, because they have designed the Fleshlight Vibro to be the next generation of jack-off toys: a completely new inner texture PLUS vibration! The Fleshlight Vibro sports an exclusive inner texture, lined with small cylindrical "fingers" designed to transfer vibrations along the length of the shaft for increased intensity and pleasure. Three small-yet-powerful vibrating bullets are included with the Vibro, each of which fit into the secure bullet pockets that are located on the outside of the sleeve before inserting it into the case. You can choose how many of the bullets to insert to achieve the desired amount of stimulation or take them out completely for a vibration-free sleeve.

Details

Length: 10 in.

Penetrable Length: 8 in.

Diameter: 4 in.

Material(s): SuperSkin®

Settings: 3 x 1-speed Fleshlight bullets (batteries included)

Power Source: 3 x LR44 button cell batteries per bullet 

Manufacturer: Fleshlight

Care/Cleaning

This product is made of SuperSkin®, a soft, pliable, high-quality material that is patented by Fleshlight. Although Super Skin is a porous material, it is non-toxic, phthalate-free, latex-free, 100 percent body safe, and reasonably easy to use and clean. We don’t recommend sharing your Fleshlight toy with other people (except with condom usage) because its porous nature makes sterilizing this sleeve impossible, but with proper usage and care, your Fleshlight will have a long life.

SuperSkin® is reasonably simple to care for and easy to clean. Here are a few tips:

Do not cut or alter the shape of the material. Doing so will cause irreparable harm to your toy. SuperSkin®, once cut, will continue to tear. This means you should not expose your sex toy to sharp objects.

Do not expose your Fleshlight toy to oil-based or silicone-based lubricants, since they will slowly destroy the Fleshlight material over time. Fleshlight recommends the use of water-based lubricants ONLY.

Do not use soap or other cleaners to wash your Fleshlight. Simply rinse your removable Fleshlight sleeve with warm water from your sink and allow time for it to dry before storing. For tough cleaning, Fleshlight suggests using a little isopropyl alcohol. To maintain that soft feel, you can sprinkle a liberal amount of cornstarch on the sleeve (when dry) and shake off the excess powder. Fleshlight does NOT recommend the use of talcum or baby powder to powder your sleeve.

Let your toy air dry or use a lint-free towel to pat it dry before you put it away. Shake out as much water as possible and place in a well ventilated area—near a window or next to a fan. For quick drying, slide a thin cloth/towel through it from one end to the other. When you return it to the case, make sure to leave the end caps loose so that air can continue to circulate.

You can warm your Fleshlight sleeve by removing it from the case and soaking it in a sink/tub filled with warm water. If necessary, drain the water and repeat the process with new warm water. Do not boil or microwave your sleeve! Shake off the water and re-insert the sleeve into the Fleshlight case, adjust the tightness of the cap at the bottom to vary the suction, and finish by applying a liberal amount of lubricant to the orifice and yourself. You can also try warming the lube in the sink/tub at the same time as the sleeve.

Manufacturer:

FLESHLIGHT

Fleshlight may be the world's best known name in masturbation toys for bodies with penises, and all that stroking sensation is owned, manufactured, and distributed by Interactive Lifeforms Inc. Founded in 1995, ILF has quickly come to dominate the world of masturbation sleeves, expanding to create seven product lines, their own lubricants, cleaning products, and toy accessories.

We carry a variety of acrylic pumping cylinders because we know that genital anatomy varies widely from person to person. At 9 inches long, these cylinders are primarily designed for pumping a penis. Choosing the correct diameter is important and can be done easily utilizing the sizing tool provided in the Sizing tab. This listing is for the cylinders only and does not include the hand pump or the cylinder cushion we recommend using for comfort and increased vacuum seal ability. 

Many people enjoy pumping because they appreciate the look and feel of having a temporarily larger erection, as well as the intense sensations that go along with ultra-engorgement. With practice, you will learn how you like to pump best, but here's a pro-tip: use your pump just after a nice warm bath or shower. While you are warm and relaxed, apply a good deal of silicone lubricant and the penis will be more supple and ready for pumping fun. 

Have fun and be safe! It is very important to go slowly as you begin to pump. Pumping too hard too fast will break capillaries and, in the worse case scenario, break larger blood vessels resulting in serious injury to the erectile tissue. You can get super results utilizing very little vacuum pressure and you will come to know your body and how you respond with practice. It is not recommended to start out using your pump for more than 15 minutes each session and not more than 4 times per week.

Details

Manufacturer: LA Pump

Country of Origin: USA

Material: Acrylic

Warranty: One Year Manufacturer Warranty 

Sizing

To pick out the correct size cylinder, you need to know the circumference of the widest point of your largest erection. For some folks, the widest point will be at the head and for others it will be mid-shaft or even toward the base. Everybody is different! 

To figure out your erect circumference use a piece of non-stretchy yarn, string or a thin strip of fabric to loosely loop around the widest point and mark where the yarn meets. After you have done this lay the yarn out flat on a ruler and measure. Use the chart below (provided by the manufacturer) to choose the correct cylinder size for your body. 

Care/Cleaning

This product is made of acrylic plastic.

Acrylic plastic is non-toxic and easy to care for and clean. It’s a hypoallergenic, non-porous material that won’t break down or leach chemicals into the body over time. To clean, use hot water and a body-friendly soap before and after each use. Be sure to allow your cylinder to dry completely before storing.

Acrylic plastic is compatible with all types of lubricant. This material can scratch easily, so keep away from abrasive surfaces, harsh chemical cleaners and do not put it in your dishwasher- doing so will void your warranty.

Manufacturer

L.A. PUMP

These pumping products are designed for comfort and safety right here in the US. L.A. Pump creates pumps of all shapes and sizes with the highest quality materials, even custom sizing cylinders for most effective and reliable results. Since 1998, L.A. Pump has stayed committed to educating its customers on how to safely use pumps-- from sizing, duration of use and lubricants, to automated pumping.

The CB-3000 restricts the wearer from being able to touch their genitals for sexual pleasure, literally putting them under lock and key so that the keyholder is given control over sexual touch and fulfillment. The hard plastic cage measures 3 inches long and features several small openings on the top and bottom for ventilation and hygiene, as well as a central slot at the end for urination. The device is held on by a ring in the back that fits behind the base of the scrotum and penis, "trapping" the balls safely and comfortably between the ring and the cage. Both the ring and the locking pins and spacer that hold it in place are included in multiple sizes for a customizable fit.

Not only does the CB-3000 provide safe and thorough constriction, it's also expertly designed for discreet and unobtrusive daily wear. Many customers say they can use this chastity device at a urinal, though it may be helpful to have a piece of tissue to dry the end of the cage. On the other hand, some people find that they experience more spray while wearing this device and prefer to sit while using the restroom. In addition to the brass padlock that is included with this device, the CB-3000 also comes with five serial-numbered, plastic tamper-proof locks. When locked with a plastic lock, the device will be TSA compliant and will not set off metal detectors in airports or at other security checkpoints, making it possible to wear the device 24/7 without interfering with regular travel or professional routines. The unique serial number on each one-time-use plastic lock prevents “cheating” by snipping off one lock and replacing it with another! In the case of emergency, you can twist the cage and ring to break the pins that hold the device closed and easily remove the entire device.

Concerned about fit? For a chastity device with a similar design and significantly longer cage, check out The Curve.

Details

Length: 3.0 in.

Internal Diameter: 1.45 in.

Material(s): Polycarbonate

Manufacturer: A.L. Enterprises Inc.

Manufacturer Warranty: 1 year parts replacement warranty against manufacturer defect

Country of Origin: Made in USA

Care/Cleaning

The CB-3000 is made out of polycarbonate plastic material that is both exceptionally lightweight and durable. Polycarbonate is also a medical grade material that is hygienic and easy to wash and clean.

Make sure you know the size of your flaccid penis (measured along the topside from pubic bone to tip) to determine which chastity device will fit correctly—like all Smitten Kitten products, we do not offer returns on these devices. Also note that people with an especially large cock head may have a more difficult time fitting in these devices. This style of chastity devices ensure that you truly cannot get hard while wearing this device, and times when your mind/body wants to have an erection will prove at least mildly uncomfortable. The hard plastic is definitely unforgiving, and some people experience pinching or other irritation. Some people can wear these devices for weeks or even months at a time, but be sure to always practice safety and err on the side of caution. If your chastity device becomes uncomfortable to wear, remove it for a day or two. Also, be aware that cleanliness while wearing your chastity device is essential, though it can prove difficult. While wearing, wash with soap and water and flush with running water as best you can. It is also advisable to remove the device every few days for a thorough cleaning.

Sizing

This product is designed to be put on while the penis is in a relaxed state. First, choose your ring size by first finding the smallest ring that you fit into, then going up a size. A ring that is too small may pinch the skin of the scrotum; a ring that is too loose may result in uncomfortable twisting of the device. Take the bottom portion of the ring and put it around the base of the penis and testicles. Insert the top ring section with the guide pins facing outward, and then slide the other top half on in front of that, pushing the penis in a downward position while attaching these two pieces to prevent pinching. Insert the shaft into the cage. Many people find that lubricant makes putting this device on much easier (silicone lubricant is most recommended for this, as water-based lubricant may dry up uncomfortably after the device is on if it is not all washed off entirely). Next, choose an appropriately-sized spacer and locking pin. Again, you will want to find just the right size that is neither too tight or too loose. Be sure to watch your testicles carefully while wearing this device for any signs of discoloration or coldness. Ultimately, you will find the right combination of rings and spacers that will allow you to wear the device comfortably for several days at a time (or longer), as desired. Insert the locking pin in the recessed space on the back side of the ring, and put the spacer between the rings and the front cock cage. When the ring, guide pins, locking pin, and spacers have all been attached to the, attach the brass padlock. Your chastity device should now be under the control of a diligent keyholder.

Manufacturer

A.L. Enterprises is a family owned and operated business based in Las Vegas, NV that has been specializing in cock & ball chastity devices since 1999. Their CB-X line of chastity devices are easily some of the highest-quality cock & ball chastity devices we’ve seen on the market. (In fact, their products are so popular that counterfeit versions are common online. Rest assured, we’re an approved distributor of the real thing.) All A.L. Enterprises products carry a one year parts replacement warranty against manufacturer defect.

The SpareParts Deuce is a jock-style strap-on harness designed to accommodate a penis and testicles. It features a soft fabric front pouch with two O-rings sewn in; the upper ring harnesses a dildo securely against the pubic bone area, while the wearer's penis can sit comfortably inside the pouch or extend through the soft lower ring for access during play. The Deuce is wearable with or without an erection, making it perfect for double penetration with a dildo and penis or simply for penetrative play with a dildo regardless of ability to maintain or achieve an erection. Made of a sturdy yet breathable nylon/spandex blend, this harness is comfortable, rugged enough for the most enthusiastic strap-on play, and machine washable for years of enjoyment.

Be sure to check the sizing chart, as the Deuce and the Deuce Magnum offer different lower ring sizes to best accommodate the wearer's natural girth. Additionally, the Deuce and the Deuce Magnum are each available in two sizes of adjustable waist belt and leg straps to fit a wide variety of bodies.

Details

Material(s): 77% Nylon / 23% Spandex fabric. Velcro and elastic straps.

Manufacturer: SpareParts HardWear

Manufacturer Warranty: 1 year

Country of Origin: Designed and manufactured in USA

Sizing

From the Manufacturer:

SIZE CHART

Deuce Size A
Belt: 20 - 50 in.
Leg straps: 10 -16 in.
Upper hole diameter: 1.25 - 2 in.
Lower hole diameter: 1.5 - 1.87 in.

Care/Cleaning

Manufacturer

SPAREPARTS HARDWEAR

SpareParts started out as a small company, and we love the ways that they've expanded their product line over the years. They spend a lot of time on product development, and send prototypes out for user testing before unveiling their final product. The effort and care they put into their products and their interest in user feedback are truly what makes for the high quality and popularity of all of their products. Plus, in an industry where there is an abundance of harness designs, the folks at SpareParts are truly innovators with the unique designs of their comfortable, durable, and sexy harnesses.