-
Quick ViewDeuce Harness
SpareParts HardWear
$ 139.99
SpareParts HardWear
Deuce Harness
$ 139.99
The SpareParts Deuce is a jock-style strap-on harness designed to accommodate a penis and testicles. It features a soft fabric front pouch with two O-rings sewn in; the upper ring harnesses a dildo securely against the pubic bone area, while the wearer's penis can sit comfortably inside the pouch or extend through the soft lower ring for access during play. The Deuce is wearable with or without an erection, making it perfect for double penetration with a dildo and penis or simply for penetrative play with a dildo regardless of ability to maintain or achieve an erection. Made of a sturdy yet breathable nylon/spandex blend, this harness is comfortable, rugged enough for the most enthusiastic strap-on play, and machine washable for years of enjoyment.
Be sure to check the sizing chart, as the Deuce and the Deuce Magnum offer different lower ring sizes to best accommodate the wearer's natural girth. Additionally, the Deuce and the Deuce Magnum are each available in two sizes of adjustable waist belt and leg straps to fit a wide variety of bodies.
Details
Material(s): 77% Nylon / 23% Spandex fabric. Velcro and elastic straps.
Manufacturer: SpareParts HardWear
Manufacturer Warranty: 1 year
Country of Origin: Designed and manufactured in USA
Sizing
From the Manufacturer:
Which size Deuce™ is for you? Start with measuring for the perfect fit.
For Deuce™ you will need to consider Belt measurements (hips), Leg measurements (thighs) and penis measurement (girth only) to determine which Deuce™ will produce the best fit for you, or your partner.SIZE A or SIZE B:
Follow these simple steps to determine which Deuce™ product will fit you perfectly!
To determine if you or your partner is a size A or B, you will need to consider both the Belt and Leg strap measurements.MEASURING FOR THE BELT:
Wrap measuring tape around your hips, where you would wear your belt. Take the number where the tape measure completes and crosses over itself. You should add a few (3-4) inches to this measurement for size fluctuation and room for sizing adjustment. Take the measurement and see size chart above for Belt and determine which belt would be best.(You should be able to select a size that is reflective of your pant or belt size. So if you wear a size 32 in pants, and they fit you securely, you should select the Deuce™ that best fits 32 inches).
MEASURING FOR LEG STRAPS:
1. To measure which size is best for the wearer; first figure out where you will be wearing it on your hips. The best way to do this is to put on a regular belt, as this will help you to have a place to start and finish measurement on the next step.
2. Next take the tape measure and start by taking the end of it and holding it in the center of the belt (in line with your belly button).
Slide the measuring tape between your legs. Select which leg you want to use for measuring and wrap the measuring tape taught around the back of that leg (around the butt check) and then bring it back around to the front back to the center of the belt where you started the measurement.
In essence you should have the measuring tape wrapped fully around one of your legs tautly (but not so tight it restricts blood flow) with the start and end point of the measuring tape being the front center of your belt.
Take the leg strap measurement, and then subtract 15 inches, this should give you the length of leg strap you need for the harness to fit securely but still be comfortable.DEUCE™ OR DEUCE ™ MAGNUM:
To determine if you or your partner requires a Deuce™ or Deuce Magnum™ product you will need to consider penis girth measurement.PENIS MEASUREMENT:
Wrap the tape measure around the base of the penis one complete time, and where the tape measure crosses over it self, take the measurement and see size chart above for Circumference of Second Hole Opening (For Penis). Keep in mind any size changes that may occur when penis is erect vs. non-erect.SIZE CHART
Deuce Size A
Belt: 20 - 50 in.
Leg straps: 10 -16 in.
Upper hole diameter: 1.25 - 2 in.
Lower hole diameter: 1.5 - 1.87 in.
Deuce Size B
Belt: 35 - 65 in.
Leg straps: 14 - 24 in.
Upper hole diameter: 1.25 - 2 in.
Lower hole diameter: 1.5 - 1.87 in.
Deuce Magnum Size A
Belt: 20 - 50 in.
Leg straps: 10 - 16 in.
Upper hole diameter: 1.25 - 2 in.
Lower hole diameter: 2 - 2.375 in.
Deuce Magnum Size B
Belt: 35 - 65 in.
Leg straps: 14 - 24 in.
Upper hole diameter: 1.25 - 2 in.
Lower hole diameter: 2 - 2.375 in.Care/Cleaning
Instructions from the manufacturer:Wash before use. Hand or machine washable, gentle cycle. Line, lay flat or tumble dry on low or cool temperature.Manufacturer
SPAREPARTS HARDWEAR
SpareParts started out as a small company, and we love the ways that they've expanded their product line over the years. They spend a lot of time on product development, and send prototypes out for user testing before unveiling their final product. The effort and care they put into their products and their interest in user feedback are truly what makes for the high quality and popularity of all of their products. Plus, in an industry where there is an abundance of harness designs, the folks at SpareParts are truly innovators with the unique designs of their comfortable, durable, and sexy harnesses.
-
Quick ViewJoque Harness
SpareParts HardWear
$ 119.99
SpareParts HardWear
Joque Harness
$ 119.99
The Joque by SpareParts HardWear ingeniously combines the best features of underwear-style and strap-style harnesses to create a comfortable, adjustable, and durable hybrid. Crafted from sturdy, stretchy spandex and nylon, the Joque features a fabric front pouch to hold a dildo or packer securely in place, supported by a wide waistband and two leg straps with cinching buckles and Velcro for a quick, easy, and supremely adjustable fit. The sewn in O-ring is slightly stretchy, and can accommodate flared-base or double-ended dildos with a diameter of up to 1.5 inches. Two tiny pockets also enable the addition of a bullet vibrator for extra stimulation. The Joque is entirely waterproof and machine washable, making it one of the most user-friendly harnesses available from the moment you put it on until after playtime is over.
Strong and sturdy enough for the most enthusiastic strap-on play, this harness is entirely waterproof, machine-washable, and will accommodate any dildo up to 1.5" wide. The soft fabric pouch can be used for packing, will accommodate a small vibrator, or allow you to use a double dildo.
Details
Material(s): 77% Nylon / 23% Spandex fabric. Velcro and elastic straps.
Manufacturer: SpareParts HardWear
Manufacturer Warranty: 1 year
Country of Origin: Designed and manufactured in USA
Care/Cleaning
Recommendations from the manufacturer:Wash before use. Hand or machine washable (preferably in a wash bag). Low temperature tumble dry or lay flat to dry.Sizing
Sizes A - 20"-50" hip strap, 10"-16" leg straps
Size B - 35"-65" hip strap, 14"-24" leg straps
Instructions from the Manufacturer:
Which size Joque™ is for you? Start with measuring for the perfect fit.
For Joque™ you will need to consider Belt measurements (hips), Leg measurements (thighs) to determine which Joque™ will produce the best fit for you, or your partner.SIZE A or SIZE B:
Follow these simple steps to determine which Joque™ product will fit you perfectly!
To determine if you or your partner is a size A or B, you will need to consider both the Belt and Leg strap measurements.MEASURING FOR THE BELT:
1. To measure which size is best for the wearer; first consider where you will be wearing it whether it’s on your waist (high ride) or on your hips (low ride).
If you prefer to wear your harness high, instead of low (please be aware many wearers like to wear their harness low as they want it to sit on their clitoris so it allows for stimulation where ever possible); measure around your waist instead of your hips.
2. Wrap the measuring tape around your hips (or waist if applicable), where you would wear your belt. Take the number where the tape measure completes and crosses over itself. You should add a few (3-4) inches to this measurement for size fluctuation and room for sizing adjustment. Take the measurement and see size chart above for Belt and determine which belt would be best.
(You should be able to select a size that is reflective of your belt size. So for example: if you wear a size 32 belt, and it has a good fit with a couple holes for adjustment, you should select the Joque that best fits 32 inches).
1. To measure which size is best for the wearer; first figure out where you will be wearing it on your hips (or waist if applicable). The best way to do this is to put on a regular belt, as this will help you to have a place to start and finish measurement on the next step.
2. Next take the tape measure and start by taking the end of it and holding it in the center of the belt (in line with your belly button).
Slide the measuring tape between your legs. Select which leg you want to use for measuring and wrap the measuring tape taught around the back of that leg (around the butt check) and then bring it back around to the front back to the center of the belt where you started the measurement.
In essence you should have the measuring tape wrapped fully around one of your legs tautly (but not so tight it restricts blood flow) with the start and end point of the measuring tape being the front center of your belt.
Take the leg strap measurement, and then subtract 14 inches, this should give you the length of leg strap you need for the harness to fit securely but still be comfortable.Manufacturer
SPAREPARTS HARDWEAR
SpareParts started out as a small company, and we love the ways that they've expanded their product line over the years. They spend a lot of time on product development, and send prototypes out for user testing before unveiling their final product. The effort and care they put into their products and their interest in user feedback are truly what makes for the high quality and popularity of all of their products. Plus, in an industry where there is an abundance of harness designs, the folks at SpareParts are truly innovators with the unique designs of their comfortable, durable, and sexy harnesses.
-
Quick View
SpareParts HardWear
Tomboi Harness
$ 89.99
For a deluxe strap-on experience with ultimate comfort, try the original Tomboi. This brief-style harness features an impressively stable front panel with two internal vibe pockets for added stimulation (vibes sold separately). Inside the harness, two panels of soft fabric separate the dildo base from your skin if that's your preference. The fabric can also be easily drawn aside, making this harness totally compatible with double dildos. The durable, sewn-in O-ring is compatible with toys 1.25–2.25 inches in diameter, and the quick dry, nylon spandex fabric wicks moisture away from the skin when things get hot.
The Tomboi is comfortable enough for everyday wear, and also features an elastic packing strap on the inner panel so it can double as a pair of packing shorts. Is there anything this harness can't do? Well actually... it's not adjustable. So make sure you take careful measurements and check out our sizing information for an optimum fit!
Details
Measurements:
O-Ring Diameter: 1.25-2.25 inches
O-Ring Circumference: 3.92-7.07 inches
See Sizing tab for more measurement information.
Material(s): 77% Nylon / 23% Spandex
Manufacturer: SpareParts HardWear
Warranty: The manufacturer offers a one year warranty
Country of Origin: Designed and manufactured in USA
Care/Cleaning
Instructions from the manufacturer:
This product is hand or machine washable and completely hygienic. Hand wash or machine wash on gentle cycle (launder bag recommended if machine washing). Line dry, lay flat, or tumble dry on low temperature. Please wash before use.Sizing
Suggestions from the manufacturer:
Choose your harness size based on both your actual body measurements and body shape, not based on your typical pant or jean size, which varies significantly between brands, designs, and cuts. Please don't skip this step: the right size harness will give you the most comfort and support, and will always look better than a size that's just "almost right."
GET THE CORRECT FIT:
1. Get your lower waist/hip measurement. Wrap a measuring tape around your waist, about 1 inch (2.5 cm) below your pelvic bone. Mark the number where the tape measure completes and crosses over itself.
2. Use that measurement, as well as your body shape, to determine your size. Tomboi™ performs best when your body fills out the harness, so choosing the right size is crucial. You should take your body shape into account before selecting a size. To do so, think of your body in terms of moon phases:
EVALUATING BODY IN TERMS OF MOON PHASES:
FULL MOON bodies have fuller curves. If you were to view this body shape from the side, you would see a half-moon shape in rear, and a quarter to half-moon shape in front, where the stomach is. If you have a full moon shape…choose the next size up.
THREE-QUARTER MOON bodies have a balance of curves and planes. If you were to view this body shape from the side, you would see a quarter-moon shape in front and a half-moon shape in rear, or a a flatter front stomach area and a fuller three quarter-moon in rear. This body shape typically has a fuller butt and, sometimes, wider hips. If you have a three-quarter moon shape…choose the next size up.
HALF-MOON bodies are curvier in rear, flatter in front. If you were to view this body shape from the side, you would see a half-moon shape in rear. If you have a half-moon shape…stay to the size chart.
QUARTER/CRESCENT MOON bodies have gentler, less pronounced curves in rear. If you were to view this body shape from the side, you would see a quarter (or crescent) shape sloping from the tailbone to the top of the thigh. If you have a quarter/crescent moon shape…choose the next size down. If you have a quarter/crescent moon shape in rear, BUT a quarter to full-moon curve in front, at the stomach. In that case, stay to the size chart.
LOW WAIST MEASUREMENTS
XS - 26-28 inches
S - 29-32 inches
M - 33-37 inches
L - 38-40 inches
XL - 41-44 inches
2XL - 45-48 inches
3XL - 49-52 inches
4XL - 51-56 inches
5XL - 57-60 inches
Manufacturer
SPAREPARTS HARDWEAR
SpareParts started out as a small company, and we love the ways that they've expanded their product line over the years. They spend a lot of time on product development, and send prototypes out for user testing before unveiling their final product. The effort and care they put into their products and their interest in user feedback are truly what makes for the high quality and popularity of all of their products. Plus, in an industry where there is an abundance of harness designs, the folks at SpareParts are truly innovators with the unique designs of their comfortable, durable, and sexy harnesses.
-
Quick ViewTomboii Harness
SpareParts HardWear
$ 119.95
SpareParts HardWear
Tomboii Harness
$ 119.95
With two O-ring holes, three vibe pockets and an amazing range of sizes, the Tomboii boxer harness is... how do we put this delicately... DANG NICE.
One of the only drawbacks to underwear-style harnesses is their lack of adjustability, but with the Tomboii that's way less of a problem. The two O-rings allow for perfect dildo placement in whichever spot most suits your body or the kind of sex you're having. (Of course, you can also try harnessing two dildos at the same time!) The stretchy rayon knit fabric is supremely comfortable and moves with your body, but the sturdy, reinforced front panel still provides uncompromised support and control for even the most enthusiastic strap on play!
Check out our Sizing tab for detailed instructions on how to select the right harness for your body. Bullet vibes sold separately.
Details
Measurements:
O-Ring Diameter: 1.25-2.25 inches
O-Ring Circumference: 3.92-7.07 inches
See Sizing tab for more measurement information.
Material(s): 93% Rayon, 7% Spandex.
Manufacturer: SpareParts HardWear
Care/Cleaning
Instructions from the manufacturer:
Hand or machine wash warm, delicate cycle, like colors. No bleach. Non-bleach detergent recommended. Hang or lay flat to dry.
Sizing
Suggestions from the manufacturer:
For a perfect fit, please choose your harness size based on your actual body measurements and not based on your typical pant or jean size, which varies significantly between brands, designs and cuts. To find your size, measure around your lower waist, where you wear your underwear (the best place to measure is right above your hip bones). Please don't skip this step: the right size harness will give you the most comfort and support, and will always look better than a size that's just "almost right."
LOW WAIST MEASUREMENTS
XS - 26-28 inches
S - 29-32 inches
M - 33-37 inches
L - 38-40 inches
XL - 41-44 inches
2XL - 45-48 inches
3XL - 49-52 inches
4XL - 51-56 inches
5XL - 57-60 inches
Manufacturer
SPAREPARTS HARDWEAR
SpareParts started out as a small company, and we love the ways that they've expanded their product line over the years. They spend a lot of time on product development, and send prototypes out for user testing before unveiling their final product. The effort and care they put into their products and their interest in user feedback are truly what makes for the high quality and popularity of all of their products. Plus, in an industry where there is an abundance of harness designs, the folks at SpareParts are truly innovators with the unique designs of their comfortable, durable, and sexy harnesses.
-
Quick View
Cherry Bombin' Wear
Roadster Harness
$ 95.99
What a sweet ride! The Roadster harness is a vegan dream made of high quality, upcycled rubber with brass finish snaps and buckles. It's easily convertible from two straps to one, and the driver plate can be removed for a more "commando" bare bones look and double dildo compatibility. You'll love the stitching and details on this piece, along with the subtle, sensual stretch of rubber that moves with your body. Give this cherry one test drive, and you'll be sold.
Details
Hip Strap: Adjusts in circumference from 30 - 63 inches
Leg Straps: each leg strap is approximately 29 inches long
O-Ring: 2 inches in diameter
Material(s): Upcycled rubber innertubes, metal details
Manufacturer: Cherry Bombin'
Country of Origin: USA
Care/Cleaning
This product is made of rubber.
Rubber is a porous material, meaning it is not sterilizable. Rubber can be cleaned easily using hot water and soap
Manufacturer
CHERRY BOMBIN' WEAR
This Arizona-based company makes a variety of rubber products, including apparel, wallets and bags. All their products are pieced together using upcycled innertubes, and are designed to last a decade with proper care. This sustainable, vegan alternative to leather is Cherry Bombin' Wear's specialty.
-
Quick View
Sportsheets
Vibrating Velvet Strap-On Harness
$ 48.99
The Velvet Vibe Harness features a sewn-in pocket that holds a miniature vibrator just behind the O-Ring. The vibrator provides extra stimulation for the person wearing the harness and their lucky partner! This easy to wear harness has fully adjustable nylon straps that attach directly to the interchangeable O-ring, and it's machine washable. The driver plate is removable for a more minimalist variation that can accommodate a double dildo. This harness is an affordable choice that fits lots of bodies, and still features all the standard features. Perfect as a first harness or a convenient, travel-friendly option!
Details
Hip straps fit up to 60"
O-rings: 1.5", 1.75", and 2"
Material(s): polypropylene webbing, nylon webbing, nickel-free metal hardware
Manufacturer: Sportsheets
Country of Origin: USA
Care/Cleaning
This product is made of fabric and nylon webbing.
To clean, you may machine wash on a delicate cycle or hand wash. Wash in cold water with mild soap. Hang or lay flat to dry. Do not use fabric softener or bleach, and do not tumble dry or iron.
Remember to leave metal snaps or fasteners open while drying to avoid trapping liquid inside. Allowing the metal to dry completely will prevent rusting.
Manufacturer
SPORTSHEETS
Sportsheets was founded in a garage of Tom Stewart, its founder and current CEO. By enlisting the help of his family, Stewart turned Sportsheets into a multi-award winning company with five distinct product lines. Sportsheets products are functional, affordable, and built to last a lifetime. Their mission is “keeping couples connected,” which they do not only through their products, but their commitment to quality, customer service, and service to their communities.
-
SOLD OUT
Quick ViewNiore Strap On
Sportsheets
$ 38.99
Sportsheets
Niore Strap On
$ 38.99
This product is sold out
Some harnesses are labelled "plus size" simply by merit of their extra-long straps, but the Niore Strap On (Formally Beginner Plus Size Harness)from Sportsheets is actually designed with an eye for functionality with bigger bodies. Strap on harnesses need stability to work well, and the larger front panel and back strap on this product are perfectly proportioned for sizes 12 through 30.
With three interchangeable O-rings, lots of strap adjustment points and a simple, comfortable design, this harness really is a great choice for beginners. The front pad of the harness has an easily reachable pocket for a bullet vibrator (not included), and the plush back strap provides extra support.
It's important to note that this harness comes in two distinct styles. The black harness features a silky-soft microfiber fabric and a back strap that dips down in the center, while the purple harness is made with a velvet-touch fabric and has a garter belt-like silhouette in back.
Details
Hip straps fits size 12 to 30 and adjusts to 72” hips
O-rings: 1.5", 1.75", and 2"
Material(s): polypropylene webbing, nylon webbing, nickel-free metal hardware
Manufacturer: Sportsheets
Country of Origin: USA
Care/Cleaning
This product is made of fabric and nylon webbing.
To clean, you may machine wash on a delicate cycle or hand wash. Wash in cold water with mild soap. Hang or lay flat to dry. Do not use fabric softener or bleach, and do not tumble dry or iron.
Remember to leave metal snaps or fasteners open while drying to avoid trapping liquid inside. Allowing the metal to dry completely will prevent rusting.
Manufacturer
SPORTSHEETS
Sportsheets was founded in the garage of Tom Stewart, its founder and current CEO. By enlisting the help of his family Stewart turned Sportsheets into a multi-award winning company with five distinct product lines. Sportsheets products are functional, affordable, and built to last a lifetime. Their mission is “keeping couples connected,” which they do not only through their products, but their commitment to quality, customer service, and service to their communities.
-
Quick ViewRuffian Harness
Project TransAction
$ 149.99
Project TransAction
Ruffian Harness
$ 149.99
This sturdy harness is perfect for a ruffian with a tough exterior and a tender heart. The high quality leather is strong enough to withstand plenty of action while still providing stability and comfort, and the slender, finely stitched straps make a provocative contrast with that no-nonsense handle in the back. This harness would be perfect for folks who enjoy some affectionate pushing and pulling, or who like being topped from the bottom.
Details
Materials: top grain American cowhide, brass OR nickel-plated steel
Manufacturer: Project TransAction
Country of Origin: US - Made in Boston, Massachusetts
Manufacturer Warranty: If your harness breaks during typical wear, you can send it back for repair or replacement at Project TransAction's discretion.
Care/Cleaning
Leather products are porous, meaning they cannot be completely sterilized and they will absorb water, so when cleaning it is best to use as little water as possible. Only use soaps specifically made for cleaning leather, like saddle soap or specialty leather wipes. Follow cleaning instructions of whichever leather cleaner you choose, then using a dry towel pat dry until all excess moisture has been absorbed.
Standard hand soaps or dish soaps can damage dyed leather and/or dry out leather leading to cracks or fraying. Oils in lubricants or soaps can stain leathers and should be avoided.
Over time leather conditioners may be necessary to keep leathers from cracking or wearing out, especially around buckles or other metal hardware.
Manufacturer
Project TransAction
Project TransAction is an eco-conscious, artist driven independent leather and screen-printing pursuit located in Boston, MA. Established with a focus on sustainability and superior quality in 2006, TransAction fuses traditional leather craft and printmaking with innovative design to meet the needs, personalities, and imaginations of the customer. TransAction sources choice, hand selected hides and hardware from reputable, often family owned, US based companies. Shop confidently knowing that TransAction will never sacrifice quality for profit, using eco-friendly, bio-degradable inks, dyes, and cleaners as well as vegetable tanned leather for many items. Project TransAction thrives on surpassing expectations with distinctive hand-crafted goods created to be durable; and likely to be your favorite new discovery.
Sizing
Size Small/Medium accommodates hip measurements 29-44"
Size Medium/Large accommodates hip measurements 34-53"
Size Large/Extra Large accommodates hip measurements 39-70"
Front snaps accommodate rings from 1-1/2"- 2-1/4"
All orders include 1-1/2" and 1-3/4" O-rings.
