Up to 65 inches

  • Deuce Harness Deuce Harness Quick View
    Deuce Harness

    SpareParts HardWear

    Deuce Harness

    $ 139.99

    The SpareParts Deuce is a jock-style strap-on harness designed to accommodate a penis and testicles. It features a soft fabric front pouch with two O-rings sewn in; the upper ring harnesses a dildo securely against the pubic bone area, while the wearer's penis can sit comfortably inside the pouch or extend through the soft lower ring for access during play. The Deuce is wearable with or without an erection, making it perfect for double penetration with a dildo and penis or simply for penetrative play with a dildo regardless of ability to maintain or achieve an erection. Made of a sturdy yet breathable nylon/spandex blend, this harness is comfortable, rugged enough for the most enthusiastic strap-on play, and machine washable for years of enjoyment.

    Be sure to check the sizing chart, as the Deuce and the Deuce Magnum offer different lower ring sizes to best accommodate the wearer's natural girth. Additionally, the Deuce and the Deuce Magnum are each available in two sizes of adjustable waist belt and leg straps to fit a wide variety of bodies.

    Details

    Material(s): 77% Nylon / 23% Spandex fabric. Velcro and elastic straps.

    Manufacturer: SpareParts HardWear

    Manufacturer Warranty: 1 year

    Country of Origin: Designed and manufactured in USA

    Sizing

    From the Manufacturer:

    Which size Deuce™ is for you? Start with measuring for the perfect fit.
    For Deuce™ you will need to consider Belt measurements (hips), Leg measurements (thighs) and penis measurement (girth only) to determine which Deuce™ will produce the best fit for you, or your partner.

    SIZE A or SIZE B:

    Follow these simple steps to determine which Deuce™ product will fit you perfectly!
    To determine if you or your partner is a size A or B, you will need to consider both the Belt and Leg strap measurements.

    MEASURING FOR THE BELT:
    Wrap measuring tape around your hips, where you would wear your belt.  Take the number where the tape measure completes and crosses over itself.  You should add a few (3-4) inches to this measurement for size fluctuation and room for sizing adjustment.  Take the measurement and see size chart above for Belt and determine which belt would be best.  

    (You should be able to select a size that is reflective of your pant or belt size.  So if you wear a size 32 in pants, and they fit you securely, you should select the Deuce™ that best fits 32 inches).

    MEASURING FOR LEG STRAPS:

    1. To measure which size is best for the wearer; first figure out where you will be wearing it on your hips.  The best way to do this is to put on a regular belt, as this will help you to have a place to start and finish measurement on the next step.
     
    2. Next take the tape measure and start by taking the end of it and holding it in the center of the belt (in line with your belly button).  
     
    Slide the measuring tape between your legs.  Select which leg you want to use for measuring and wrap the measuring tape taught around the back of that leg (around the butt check) and then bring it back around to the front back to the center of the belt where you started the measurement.
     
    In essence you should have the measuring tape wrapped fully around one of your legs tautly (but not so tight it restricts blood flow) with the start and end point of the measuring tape being the front center of your belt.
     
    Take the leg strap measurement, and then subtract 15 inches, this should give you the length of leg strap you need for the harness to fit securely but still be comfortable. 

    DEUCE™ OR DEUCE ™ MAGNUM:

    To determine if you or your partner requires a Deuce™ or Deuce Magnum™ product you will need to consider penis girth measurement.

    PENIS MEASUREMENT:
    Wrap the tape measure around the base of the penis one complete time, and where the tape measure crosses over it self, take the measurement and see size chart above for Circumference of Second Hole Opening (For Penis). Keep in mind any size changes that may occur when penis is erect vs. non-erect.

    SIZE CHART

    Deuce Size A
    Belt: 20 - 50 in.
    Leg straps: 10 -16 in.
    Upper hole diameter: 1.25 - 2 in.
    Lower hole diameter: 1.5 - 1.87 in.

     

    Deuce Size B
    Belt: 35 - 65 in.
    Leg straps: 14 - 24 in.
    Upper hole diameter: 1.25 - 2 in.
    Lower hole diameter: 1.5 - 1.87 in.

     

    Deuce Magnum Size A
    Belt: 20 - 50 in.
    Leg straps: 10 - 16 in.
    Upper hole diameter: 1.25 - 2 in.
    Lower hole diameter: 2 - 2.375 in.

     

    Deuce Magnum Size B
    Belt: 35 - 65 in.
    Leg straps: 14 - 24 in.
    Upper hole diameter: 1.25 - 2 in.
    Lower hole diameter: 2 - 2.375 in.
    Care/Cleaning
    Instructions from the manufacturer:
    Wash before use. Hand or machine washable, gentle cycle. Line, lay flat or tumble dry on low or cool temperature.

     

    Manufacturer

    SPAREPARTS HARDWEAR

    SpareParts started out as a small company, and we love the ways that they've expanded their product line over the years. They spend a lot of time on product development, and send prototypes out for user testing before unveiling their final product. The effort and care they put into their products and their interest in user feedback are truly what makes for the high quality and popularity of all of their products. Plus, in an industry where there is an abundance of harness designs, the folks at SpareParts are truly innovators with the unique designs of their comfortable, durable, and sexy harnesses.

     

  • Joque Harness Joque Harness Quick View
    Joque Harness

    SpareParts HardWear

    Joque Harness

    $ 119.99

    The Joque by SpareParts HardWear ingeniously combines the best features of underwear-style and strap-style harnesses to create a comfortable, adjustable, and durable hybrid. Crafted from sturdy, stretchy spandex and nylon, the Joque features a fabric front pouch to hold a dildo or packer securely in place, supported by a wide waistband and two leg straps with cinching buckles and Velcro for a quick, easy, and supremely adjustable fit. The sewn in O-ring is slightly stretchy, and can accommodate flared-base or double-ended dildos with a diameter of up to 1.5 inches. Two tiny pockets also enable the addition of a bullet vibrator for extra stimulation. The Joque is entirely waterproof and machine washable, making it one of the most user-friendly harnesses available from the moment you put it on until after playtime is over.

    Strong and sturdy enough for the most enthusiastic strap-on play, this harness is entirely waterproof, machine-washable, and will accommodate any dildo up to 1.5" wide. The soft fabric pouch can be used for packing, will accommodate a small vibrator, or allow you to use a double dildo. 

    Details

    Material(s): 77% Nylon / 23% Spandex fabric. Velcro and elastic straps.

    Manufacturer: SpareParts HardWear

    Manufacturer Warranty: 1 year

    Country of Origin: Designed and manufactured in USA

    Care/Cleaning
    Recommendations from the manufacturer:
    Wash before use. Hand or machine washable (preferably in a wash bag). Low temperature tumble dry or lay flat to dry.
    Sizing

    Sizes A - 20"-50" hip strap, 10"-16" leg straps

    Size B - 35"-65" hip strap, 14"-24" leg straps

    Instructions from the Manufacturer:

    Which size Joque™ is for you? Start with measuring for the perfect fit.
    For Joque™ you will need to consider Belt measurements (hips), Leg measurements (thighs) to determine which Joque™ will produce the best fit for you, or your partner.

    SIZE A or SIZE B:

    Follow these simple steps to determine which Joque™ product will fit you perfectly!
    To determine if you or your partner is a size A or B, you will need to consider both the Belt and Leg strap measurements.

    MEASURING FOR THE BELT:

    1. To measure which size is best for the wearer; first consider where you will be wearing it whether it’s on your waist (high ride) or on your hips (low ride).
    If you prefer to wear your harness high, instead of low (please be aware many wearers like to wear their harness low as they want it to sit on their clitoris so it allows for stimulation where ever possible); measure around your waist instead of your hips. 
     
    2. Wrap the measuring tape around your hips (or waist if applicable), where you would wear your belt.  Take the number where the tape measure completes and crosses over itself.  You should add a few (3-4) inches to this measurement for size fluctuation and room for sizing adjustment.  Take the measurement and see size chart above for Belt and determine which belt would be best.  
     
    (You should be able to select a size that is reflective of your belt size.  So for example:  if you wear a size 32  belt, and it has a good fit with a couple holes for adjustment, you should select the Joque that best fits 32 inches).


    1. To measure which size is best for the wearer; first figure out where you will be wearing it on your hips (or waist if applicable).  The best way to do this is to put on a regular belt, as this will help you to have a place to start and finish measurement on the next step.
     
    2. Next take the tape measure and start by taking the end of it and holding it in the center of the belt (in line with your belly button).  
     
    Slide the measuring tape between your legs.  Select which leg you want to use for measuring and wrap the measuring tape taught around the back of that leg (around the butt check) and then bring it back around to the front back to the center of the belt where you started the measurement.
     
    In essence you should have the measuring tape wrapped fully around one of your legs tautly (but not so tight it restricts blood flow) with the start and end point of the measuring tape being the front center of your belt.
     
    Take the leg strap measurement, and then subtract 14 inches, this should give you the length of leg strap you need for the harness to fit securely but still be comfortable. 

    Manufacturer

    SPAREPARTS HARDWEAR

    SpareParts started out as a small company, and we love the ways that they've expanded their product line over the years. They spend a lot of time on product development, and send prototypes out for user testing before unveiling their final product. The effort and care they put into their products and their interest in user feedback are truly what makes for the high quality and popularity of all of their products. Plus, in an industry where there is an abundance of harness designs, the folks at SpareParts are truly innovators with the unique designs of their comfortable, durable, and sexy harnesses.

     

  • Plus Size Beginner Strap On Plus Size Beginner Strap On Quick View
    Plus Size Beginner Strap On

    Sportsheets

    Plus Size Beginner Strap On

    $ 38.99

    Some harnesses are labelled "plus size" simply by merit of their extra-long straps, but this beauty from Sportsheets is actually designed with an eye for functionality with bigger bodies. Strap on harnesses need stability to work well, and the larger front panel and back strap on this product are perfectly proportioned for sizes 12 through 30. 

    With three interchangeable O-rings, lots of strap adjustment points and a simple, comfortable design, this harness really is a great choice for beginners. The front pad of the harness has an easily reachable pocket for a bullet vibrator (not included), and the plush back strap provides extra support.

    It's important to note that this harness comes in two distinct styles. The black harness features a silky-soft microfiber fabric and a back strap that dips down in the center, while the purple harness is made with a velvet-touch fabric and has a garter belt-like silhouette in back.

    Details

    Hip straps fits size 12 to 30 and adjusts to 72” hips

    O-rings: 1.5", 1.75", and 2"

    Material(s): polypropylene webbing, nylon webbing, nickel-free metal hardware

    Manufacturer: Sportsheets

    Country of Origin: USA

    Care/Cleaning

    This product is made of fabric and nylon webbing.

    To clean, you may machine wash on a delicate cycle or hand wash. Wash in cold water with mild soap. Hang or lay flat to dry. Do not use fabric softener or bleach, and do not tumble dry or iron.

    Remember to leave metal snaps or fasteners open while drying to avoid trapping liquid inside. Allowing the metal to dry completely will prevent rusting.

    Manufacturer

    SPORTSHEETS

    Sportsheets was founded in the garage of Tom Stewart, its founder and current CEO. By enlisting the help of his family Stewart turned Sportsheets into a multi-award winning company with five distinct product lines. Sportsheets products are functional, affordable, and built to last a lifetime. Their mission is “keeping couples connected,” which they do not only through their products, but their commitment to quality, customer service, and service to their communities.

  • Plus Size Red Lace Corsette Strap On Plus Size Red Lace Corsette Strap On Quick View
    Plus Size Red Lace Corsette Strap On

    Sportsheets

    Plus Size Red Lace Corsette Strap On

    $ 39.99

    Style and function make this harness a very popular choice. The corset back laces up with a charming ribbon, but also provides comfort and extra stability. The straps are comfortable and machine washable (delicate only and air dry), and feature red satin and delicate lace details.

    If you look closely you'll not only notice the thoughtful and sexy aesthetic choices Sportsheets made, but you'll see that the waist straps and leg straps connect directly to the O-ring. This is an important design feature to understand because that means the dildo is directly connected to the harness wearer thereby lending the most control possible! This design choice also makes this harness customizable for any flared-based dildo as long as you use the correct O-ring size! 

    Details

    Hip straps fits size 12 to 30 and adjusts to 72” hips

    O-rings: 1.5", 1.75", and 2"

    Material(s): polypropylene webbing, nylon webbing, nickel-free metal hardware

    Manufacturer: Sportsheets

    Country of Origin: USA

    Care/Cleaning

    This product is made of fabric and nylon webbing.

    To clean, you may machine wash on a delicate cycle or hand wash. Wash in cold water with mild soap. Hang or lay flat to dry. Do not use fabric softener or bleach, and do not tumble dry or iron.

    Remember to leave metal snaps or fasteners open while drying to avoid trapping liquid inside. Allowing the metal to dry completely will prevent rusting.

    Manufacturer

    SPORTSHEETS

    Sportsheets was founded in a garage of Tom Stewart, its founder and current CEO. By enlisting the help of his family, Stewart turned Sportsheets into a multi-award winning company with five distinct product lines. Sportsheets products are functional, affordable, and built to last a lifetime. Their mission is “keeping couples connected,” which they do not only through their products, but their commitment to quality, customer service, and service to their communities.

  • SOLD OUT
    Scandal Corset Harness Scandal Corset Harness Quick View
    Scandal Corset Harness

    California Exotic Novelties

    Scandal Corset Harness

    $ 59.99

    This product is sold out

    This corset-back harness features sensuous satin brocade fabric and black, brushed-finish metal accents, and quite frankly looks fabulous. The extra coverage in the back provides stability for the whole harness, and keeps the dildo positioned exactly on target. The interchangeable metal O-rings are easy to switch out, allowing for a variety of toy girths. 

    Details

    We ship this item without retail packaging to save on customer shipping costs.

    Sizing: Hip strap fits 32-68 inch hips. Leg straps adjust up to 31 inches. Corset back is 16.5 inches wide

    O-rings: Black-coated metal, 1.5 and 2 inch diameters

    Material(s): fabric, polypropylene webbing, nylon webbing, nickel-free metal hardware

    Manufacturer: California Exotic Novelties

    Care/Cleaning

    This product is made of fabric and nylon webbing.

    To clean, you may machine wash on a delicate cycle or hand wash. The manufacturer recommends using a delicates bag to protect the product in the washer and dryer. Wash in cold water with mild soap. Hang or lay flat to dry. Do not use fabric softener or bleach, and do not tumble dry or iron.

    Remember to leave metal snaps or fasteners open while drying to avoid trapping liquid inside. Allowing the metal to dry completely will prevent rusting.

    Manufacturer

    CALIFORNIA EXOTIC NOVELTIES

    This industry giant has been around for decades, selling a wide variety of sex toys including over 60 different product lines today. Not every product line meets Smitten Kitten standards, but as CalExotics continues to add more and more quality products, we continue to give them an encouraging thumbs up. We’ve carefully curated a selection of CalExotics toys that offer ways to safely and affordably explore different kinds of sexual pleasure.

Subscribe to Email